| SIRIUS POSITION SWITCH PLASTIC ENCLOSURE ACC. TO EN50047, 50MM DEVICE CONNECTION 2X(M20X1.5); 1NO/1NC SNAP-ACTION CONTACTS WITH SPRING ROD 142.5MM LONG RED LED 24 V, USER-SPECIFIC VISIBLE FROM ALL ANGLES, M12 CONNECTOR 4PIN W. TWO PIPE CLAMPS 25-28MM FOR CLAMP FIXING |
Manufacturer article number | | |
- of the basic unit included in the scope of supply
| | 3SE5232-0HC05 |
- of the actuator head for position switches included in the scope of supply
| | 3SE5000-0AR01 |
|
General technical details: | | |
product designation | | standard position switch |
Type of voltage / of the supply voltage | | |
- of the optional LED display
| | DC |
Insulation voltage | | |
| V | 250 |
Degree of pollution | | class 3 |
Thermal current | A | 4 |
Operating current | | |
| | |
| A | 4 |
| | |
| A | 3 |
Continuous current | | |
- of the slow DIAZED fuse link
| A | 4 |
- of the quick DIAZED fuse link
| A | 4 |
- of the C characteristic circuit breaker
| A | 2 |
Mechanical operating cycles as operating time | | |
| | 10,000,000 |
Electrical operating cycles as operating time | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 / typical
| | 10,000,000 |
Electrical operating cycles in one hour | | |
- with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026
| | 6,000 |
Repeat accuracy | mm | 0.05 |
Design of the contact element | | snap-action contacts |
Number of NC contacts | | |
| | 1 |
Number of NO contacts | | |
| | 1 |
Resistance against vibration | | 0.35 mm / 5g |
Resistance against shock | | 30g / 11 ms |
Ambient temperature | | |
| °C | -25… +60 |
| °C | -40… +90 |
Width of the sensor | mm | 50 |
material | | |
| | plastic |
Material / of the housing / of the switch head | | plastic |
Design of the operating mechanism | | total length = 142.5 mm (spring 50 mm, plastic plunger 50 mm) |
Actuating speed | mm/s / m/s | 0.1… 1 |
Protection class IP | | IP65/IP67 |
Built in orientation | | any |
Cable gland version | | cable with M12 connector |
Design of the electrical connection | | screw-type terminals |
Design of the plug-in connection | | cable with M12 connector, 4-pole: pin 1= terminal 21, pin 2= LED/+ , pin 3= LED/- , pin 4= 22 |
Item designation | | |
- according to DIN 40719 extendable after IEC 204-2
| | S |
- according to DIN EN 61346-2
| | B |
|
Certificates/approvals: | | |
General Product Approval | Functional Safety / Safety of Machinery | Test Certificates | | |
| |
| |
|
last change: | Mar 12, 2012 |