SIMATIC DP, ELECTRONIC SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA, "H"-SHUT DOWN

Артикул: 6ES7132-7RD01-0AB0
Наименование: SIMATIC DP, ELECTRONIC SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA, "H"-SHUT DOWN (siemens)
Производитель: Siemens


Наименование продукта
SIMATIC DP, ELECTRONIC SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA, "H"-SHUT DOWN
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2006-07-01
Manuals weitere>>
Устройство децентрализованной периферии ET 200 iSP  2007-03-14
SIMATIC DP, ELECTRONIC SUBMODULE FOR ET 200ISP, 4 DO, DC 23,1V/20MA, "H"-SHUT DOWN
Input current
from load voltage L+ (without load), max. 340 mA; with actuator supply
from backplane bus 3.3 V DC, max. 10 mA
Power losses
Power loss, typ. 2.5 W
Address area
Address space per module
without packing 2 byte
Digital outputs
Number/binary outputs 4; additionally 1 intrinsically-safe input for H shutdown
Functionality/short-circuit strength Yes; Ex i function
No-load voltage Uao (DC) 23.1 V
Internal resistor Ri 275 Ω
Trend key points E
Voltage Ue (DC) 17.1 V
Current Ie 20 mA
Output current
for signal "1" rated value 0.02 A
Output delay with resistive load
0 to "1", max. 2 ms
1 to "0", max. 1.5 ms
Parallel switching of 2 outputs
for increased power No; for Ex reasons not possible; nor for predecessor
Switching frequency
with resistive load, max. 100 Hz
with inductive load, max. 2 Hz
Cable length
Cable length, shielded, max. 500 m
Cable length unshielded, max. 500 m
Interrupts/diagnostics/status information
Alarms
Diagnostic alarm Yes
Diagnostic messages
Diagnostic functions Yes
Diagnostic information readable Yes
Wire break Yes; R > 10 kohms, I < 100 µA
Short circuit Yes; R< 800 ohms (one output), R< 40 ohms (outputs connected in parallel)
Diagnostics indication LED
Group error SF (red) Yes
Status indicator digital output (green) Yes
Parameter
Diagnosis: wire break Yes
Diagnosis: short circuit Yes
Behavior on CPU/Master STOP, channel-wise Yes
Ex(i) characteristics
Max. values of output circuits (per channel)
Ta (permissible ambient temperature), max. 70 °C
Standards, approvals, certificates
CE mark Yes
Use in hazardous areas
Type of protection acc. to EN 50020 (CENELEC) II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I
Type of protection acc. to KEMA Not relevant
Dimensions
Width 30 mm
Height 129 mm
Depth 136.5 mm
Weight
Weight, approx. 255 g
Status Mar 12, 2012

Назад в раздел