| SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 AO I HIGH SPEED 15 MM WIDE, +/-20 MA; 16 BIT, 4 . .20 MA; 16 BIT CYCLE TIME 0.1 MS WITH LED SF (GROUP FAULT) |
|
Supply voltage |
Load voltage L+ |
Rated value (DC) | 24 V |
Reverse polarity protection | Да |
Электропитание / [nicht versorgt - Eingang] / [nicht versorgt - Eingansstrom] |
Потребление тока / [nicht versorgt - aus Lastspannung L+ (ohne Last), max.] | 150 mA |
Потребление тока / [nicht versorgt - aus Rückwandbus DC 3,3 V, max.] | 10 mA |
Power losses |
Power loss, max. | 2,4 W |
Address area |
Address space per module |
Address space per module, max. | 4 byte |
Analog outputs |
Количество аналоговых выходов | 2 |
Current output, no-load voltage, max. | 18 V |
Cycle time (all channels) max. | 250 µs |
Output ranges, current |
-20 to +20 mA | Да |
4 to 20 mA | Да |
Connection of actuators |
for current output 2-conductor connection | Да |
Load impedance (in rated range of output) |
with current outputs, max. | 500 Ω |
with current outputs, inductive load, max. | 1 mH |
Destruction limits against externally applied voltages and currents |
Current, max. | 15 mA |
Cable length |
Cable length, shielded, max. | 200 m |
Analog value creation |
Integrations and conversion time/ resolution per channel |
Аналого-цифровое разрешение / [nicht versorgt - inklusive Übersteuerungsbereich und Vorzeichen] / [nicht versorgt - je Kanal] / [nicht versorgt - maximal] | 16 bit |
Settling time |
for resistive load | 0,05 ms |
for capacitive load | 0,05 ms |
for inductive load | 0,05 ms |
Errors/accuracies |
Output ripple (based on output area, bandwidth 0 to 50 kHz) | +/- 0,02 % |
Linearity error (relative to output area) | +/- 0,03 % |
Temperature error (relative to output area) | +/- 0,01 %/K |
Crosstalk between the outputs, min. | -60 dB |
Repeat accuracy in settled status at 25 °C (relative to output area) | +/- 0,03 % |
Operational limit in overall temperature range |
Current, relative to output area | +/- 0,2 % |
Basic error limit (operational limit at 25 °C) |
Current, relative to output area | +/- 0,1 % |
Isochronous mode |
Isochronous operation (application synchronized up to terminal) | Да |
Interrupts/diagnostics/status information |
Функция продукта / [nicht versorgt - Ersatzwertaufschaltung] | Да |
Diagnostic messages |
Функция продукта / Диагностическая функция | Да |
Diagnostic information readable | Да |
Функция диагностики / обрыв провода | Да |
Group error | Да |
Diagnostics indication LED |
Исполнение индикации / [nicht versorgt - für Diagnosefunktion: Sammelfehler SF] / [nicht versorgt - LED rot] | Да |
Galvanic isolation |
Развязка по напряжению / [nicht versorgt - Analogausgaben] |
Galvanic isolation analog outputs | Да |
Разделение потенциалов / [nicht versorgt - an den Analogausgängen ] / [nicht versorgt - zwischen den Kanälen] | Нет |
Разделение потенциалов / [nicht versorgt - an den Analogausgängen ] / [nicht versorgt - wischen den Kanälen und Rückwandbus] | Да |
Разделение потенциалов / [nicht versorgt - an den Analogausgängen ] / [nicht versorgt - zwischen den Kanälen und Lastspannung L+] | Да |
Dimensions |
Ширина | 15 mm |
Высота | 81 mm |
Глубина | 52 mm |
Weight |
Weight, approx. | 45 g |
Status | 06.02.2012 |