| SIMATIC DP, ELECTRONIC MODULE FOR ET 200S, 2 PULSE PULSED GENERATOR AND TIMER MODULE, 15 MM WIDE, 2 CHANNELS |
|
Supply voltage |
Load voltage L+ |
Rated value (DC) | 24 V; From power module |
Reverse polarity protection | Yes |
Input current |
from load voltage L+ (without load), max. | 40 mA |
from backplane bus 3.3 V DC, max. | 10 mA |
Encoder supply |
Output voltage | L+ (-0.8 V) |
Output current, rated value | 500 mA |
Output current |
Short-circuit protection | Yes |
Power losses |
Power loss, typ. | 1.8 W |
Digital inputs |
Number/binary inputs | 2 |
Input characteristic curve acc. to IEC 61131, Type 2 | Yes |
Input voltage |
Rated value, DC | 24 V |
for signal "0" | -30 to +5 V |
for signal "1" | 11 to 30 V |
Input current |
for signal "1", typ. | 9 mA |
Input delay (for rated value of input voltage) |
Input frequency (with a time delay of 0.1 ms), max. | 20 kHz |
Minimum pulse width for program reactions | 100 µs |
Cable length |
Cable length, shielded, max. | 100 m |
Digital outputs |
Number/binary outputs | 2 |
Functionality/short-circuit strength | Yes |
Response threshold, typ. | 10 A |
Limitation of inductive shutdown voltage to | L+ (-50 to -65 V) |
Lamp load, max. | 10 W |
Accuracy of pulse duration | +/- (pulse duration x 100 ppm) , +/-100 µs with a load <= 50 ohms |
minimum pulse duration | 200 µs |
Controlling a digital input | Yes |
Output voltage |
for signal "1", min. | L+ (-1 V) |
Output current |
for signal "1" rated value | 2 A |
for signal "1" permissible range for 0 to 60 °C, min. | 7 mA |
for signal "1" permissible range for 0 to 60 °C, max. | 2 A |
for signal "0" residual current, max. | 0.5 mA |
Output delay with resistive load |
0 to "1", max. | 100 µs |
1 to "0", max. | 200 µs |
Switching frequency |
with resistive load, max. | 2.5 kHz |
with inductive load, max. | 2 Hz |
on lamp load, max. | 10 Hz |
Cable length |
Cable length, shielded, max. | 1000 m |
Cable length unshielded, max. | 600 m |
Encoder |
Connectable encoders |
2-wire sensor | Yes |
Permissible quiescent current (2-wire sensor), max. | 2 mA |
Interrupts/diagnostics/status information |
Diagnostics indication LED |
Group error SF (red) | Yes |
Status indicator digital output (green) | Yes |
Status indicator digital input (green) | Yes |
Pulse generator |
Number of channels | 2; 1 digital input and 1 digital output per channel |
Galvanic isolation |
Galvanic isolation digital inputs |
between the channels | No |
between the channels and the backplane bus | Yes |
Galvanic isolation digital outputs |
between the channels | No |
between the channels and the backplane bus | Yes |
Permissible potential difference |
between different circuits | 75 VDC / 60 VAC |
Isolation |
Isolation checked with | 500 V DC |
Dimensions |
Width | 15 mm |
Height | 81 mm |
Depth | 52 mm |
Weight |
Weight, approx. | 40 g |
Status | Mar 12, 2012 |