| SIMATIC DP, INTERFACE MODULE IM151-1 STANDARD FOR ET200S; TRANSMISS. RATE UP TO 12MBIT/S; DATA VOLUME 128BYTE FOR EACH INPUT AND OUTPUT; MAX. OF 63 POWER, ELECTR. OR MOTOR STARTER MODULES UP TO 2M WIDTH CONNECTABLE; BUS INTERFACING VIA 9-WAY SUB-D INCL. TERMINATING MODULE |
|
General information |
Vendor identification (VendorID) | 806Ah |
Supply voltage |
Mains buffering |
Mains buffering, min. | 20 ms |
Input current |
from supply voltage 1L+, max. | 200 mA |
Power losses |
Power loss, typ. | 3.3 W |
Address area |
Addressing volume |
Outputs | 128 byte |
Inputs | 128 byte |
Interfaces |
Interface physics, RS 485 | Yes; 9-pin sub D socket |
PROFIBUS DP |
Cable length, max. | 1200 m |
PROFIBUS DP, output current, max. | 80 mA |
Transmission rate, max. | 12 Mbit/s; 9.6 / 19.2 / 45.45 / 93.75 / 187.5 / 500 Kbit/s; 1.5 / 3 / 6 / 12 Mbit/s |
SYNC capability | Yes |
FREECE capability | Yes |
Direct data exchange (slave-to-slave communication) | Yes |
Protocols |
Further protocols |
PROFIBUS DP protocol | Yes |
Isochronous mode |
Isochronous operation (application synchronized up to terminal) | No |
Interrupts/diagnostics/status information |
Alarms |
Alarms | No |
Diagnostic messages |
Diagnostic functions | Yes |
Diagnostics indication LED |
Bus fault BF (red) | Yes |
Group error SF (red) | Yes |
Monitoring 24 V voltage supply ON (green) | Yes |
Galvanic isolation |
between backplane bus and electronics | No |
between electronic block and PROFIBUS DP | Yes |
between supply voltage and electronics | No |
Permissible potential difference |
between different circuits | 500 V DC |
Isolation |
Isolation checked with | 500 V DC |
Dimensions |
Width | 45 mm |
Height | 119.5 mm |
Depth | 75 mm |
Weight |
Weight, approx. | 150 g |
Status | Mar 12, 2012 |