SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE

Артикул: 6ES7153-2BA01-0XB0
Наименование: SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE (siemens)
Производитель: Siemens


Наименование продукта
SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE
Жизненный цикл продукта
Разрешение на поставку Постепенное снятие продукта с производства Снятие продукта с производства Окончательное снятие продукта с производства
2002-11-01 2006-07-01 2006-07-01 2009-10-01
SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE
General information
Vendor identification (VendorID) 801Eh
Supply voltage
24 V DC Yes
permissible range (ripple included), lower limit (DC) 20.4 V
permissible range (ripple included), upper limit (DC) 28.8 V
External protection for supply cables (recommendation) not necessary
Input current
Current consumption, max. 550 mA; at 24 V DC
Inrush current, typ. 2.5 A
I²t 0.1 A²·s
Output voltage
Rated value (DC) 5 V
Output current
for backplane bus (5 V DC), max. 1 A
Power losses
Power loss, typ. 5 W
Address area
Addressing volume
Outputs 128 byte
Inputs 128 byte
Time stamping
Accuracy 10 ms; 10 ms / 3 ms
Number of message buffers 15
Messages per message buffer 20
Number of stampable digital inputs, max. 128
Time format RFC 1119 Internet (ISP)
Time resolution 1 ms
Time interval for transmitting the message buffer if a message is present 1000 ms
Time stamp on signal change rising / falling edge as signal entering or exiting
Interfaces
Interface physics, RS 485 Yes
PROFIBUS DP
Node addresses 1 to 125 permitted
Automatic detection of transmission speed Yes
Transmission rate, max. 12 Mbit/s
SYNC capability Yes
FREECE capability Yes
Direct data exchange (slave-to-slave communication) Yes; Sender
PROFIBUS DP RS 485
1st interface
DP slave
GSD file (for DPV1) SIEM801E.GSD; SI01801E.GSG (for IM 153-2AA0x); SI02801E.GSG (for IM 153-2BA0x)
Automatic baud rate search Yes
Communication functions
Bus protocol/transmission protocol PROFIBUS DP to EN 50170
Isolation
Isolation checked with Isolation voltage 500 V
Ambient conditions
Operating temperature
Min. 0 °C
max. 60 °C
Air pressure
Operating altitude above sea level, max. 3000 m
Degree and class of protection
IP20 Yes
Dimensions
Width 40 mm
Height 125 mm
Depth 117 mm
Weight
Weight, approx. 360 g
internTechDB
Characteristics will be deleted after 2012-12-31
Product version
STEP 7 Yes; STEP 7 / COM PROFIBUS / non-Siemens tools via GSD file
Status Mar 12, 2012
Оборудование снято с производства, прямой заменой является:
Part number:6ES7153-2BA01-0XB0
Notes:

Назад в раздел