| | SIMATIC DP, PROFIBUS DP INTERFACE MODULE IM154-1 DP FOR ET 200PRO INCLUSIVE TERMINATING MODULE, CONNECTING MODULE IM 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY |
| |
| General information |
| Vendor identification (VendorID) | 8118H |
| Supply voltage |
| Rated value (DC) | 24 V |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; against destruction |
| Short-circuit protection | Yes; over exchangeable fuses |
| Input current |
| from supply voltage 1L+, max. | 200 mA |
| Power losses |
| Power loss, typ. | 5 W |
| Address area |
| Addressing volume |
| Outputs | 244 byte |
| Inputs | 244 byte |
| Interfaces |
| PROFIBUS DP |
| Automatic detection of transmission speed | Yes |
| 1st interface |
| Type of interface | PROFIBUS DP |
| Physics | RS 485 |
| Functionality |
| DP slave | Yes |
| DP slave |
| Services |
| SYNC/FREEZE | Yes |
| Direct data exchange (slave-to-slave communication) | Yes |
| Transmission rate, min. | 9.6 kbit/s |
| Transmission rate, max. | 12 Mbit/s |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| Bus fault BF (red) | Yes |
| Group error SF (red) | Yes |
| Monitoring 24 V voltage supply ON (green) | Yes |
| Load voltage monitoring DC 24 V (green) | Yes |
| Parameter |
| DPV1 operation | possible |
| Hardware interrupt | Parameterizable |
| Swapping interrupt | Parameterizable |
| Startup if setpoint not equal to actual configuration | Parameterizable |
| Isolation |
| Isolation checked with | 500 V DC |
| Ambient conditions |
| Operating temperature |
| Min. | -25 °C |
| max. | 55 °C |
| Storage/transport temperature |
| Min. | -40 °C |
| max. | 70 °C |
| Degree and class of protection |
| IP67 | Yes |
| Dimensions |
| Width | 90 mm |
| Height | 130 mm |
| Depth | 59.3 mm |
| Weight |
| Weight, approx. | 375 g |
| Status | Mar 12, 2012 |
