| SIMATIC DP, PROFIBUS DP INTERFACE MODULE IM154-2 HIGH FEATURE FOR ET 200PRO INCLUSIVE TERMINATING MODULE CONNECTING MODULE IM 6ES7194-4A.00-0AA0 MUST BE ORDERED SEPARATELY |
|
Supply voltage |
Rated value (DC) | 24 V |
24 V DC | Yes |
Reverse polarity protection | Yes; against destruction |
Short-circuit protection | Yes; over exchangeable fuses |
Input current |
from supply voltage 1L+, max. | 200 mA |
Address area |
Addressing volume |
Outputs | 244 byte |
Inputs | 244 byte |
Interfaces |
PROFIBUS DP |
Automatic detection of transmission speed | Yes |
1st interface |
Type of interface | PROFIBUS DP |
Physics | RS 485 |
Functionality |
DP slave | Yes |
DP slave |
Services |
SYNC/FREEZE | Yes |
Direct data exchange (slave-to-slave communication) | Yes |
Transmission rate, min. | 9.6 kbit/s |
Transmission rate, max. | 12 Mbit/s |
Interrupts/diagnostics/status information |
Diagnostics indication LED |
Bus fault BF (red) | Yes |
Group error SF (red) | Yes |
Monitoring 24 V voltage supply ON (green) | Yes |
Load voltage monitoring DC 24 V (green) | Yes |
Parameter |
DPV1 operation | possible |
Diagnostic alarm | Parameterizable |
Hardware interrupt | Parameterizable |
Swapping interrupt | Parameterizable |
Hot swapping of modules | possible |
Galvanic isolation |
between backplane bus and electronics | No |
Isolation |
Isolation checked with | 500 V DC |
Ambient conditions |
Operating temperature |
Min. | -25 °C |
max. | 55 °C |
Storage/transport temperature |
Min. | -40 °C |
max. | 70 °C |
Degree and class of protection |
IP65 | Yes |
IP66 | Yes |
IP67 | Yes |
Dimensions |
Width | 90 mm |
Height | 130 mm |
Depth | 59.3 mm |
Weight |
Weight, approx. | 415 g |
Status | Mar 12, 2012 |