Model A-105 Flush Diaphragm Pressure Transducer, 100 psi to 15,000 psi, Flush-Mount Design, 17-4 PH Stainless Steel, Wetted Material, Miniature Footprint, 0.50 % Accuracy, 17-4 PH Stainless Steel, Wetted Material || 060-0287-15G
Артикул: 060-0287-15G
Наименование: Model A-105 Flush Diaphragm Pressure Transducer, 100 psi to 15,000 psi, Flush-Mount Design, 17-4 PH Stainless Steel, Wetted Material, Miniature Footprint, 0.50 % Accuracy, 17-4 PH Stainless Steel, Wetted Material || 060-0287-15G
Производитель: Honeywell
|
|
Description | The Model A-105 gauge pressure transducers are manufactured with a unitized 17-4 PH stainless steel, wetted diaphragm. The advantage of this type of design is that a thin diaphragm and heavy sidewalls are made from one piece of stainless steel. This unitized diaphragm is rugged, but at the same time, can be made thin enough to measure low pressures. Available pressure ranges span from 100 psig to 15,000 psig. These models can be used in corrosive fluid environments. The Model A-105 has welded electrical connectors as an integral part of the transducer body and recommended for applications involving rough handling, or where an all-welded, stainless steel transducer is required. All units have four (4) active bonded strain gauges arranged in a Wheatstone-bridge configuration.
| Features | - 100 psig to 15000 psig range
- Flush mount design
- No dead volume
- Miniature footprint
- Stainless steel
- CE approved
| | Potential Applications | - Engine and transmission test stands
- Fluid pump pressure
- Fuel line pressure and fuel/air ratio
- Brake assembly test
- Tire manufacturing mold pressure control
- Brake and accelerometer cable test
- Air bag system fill pressure
- Pressure brake testing, hydraulic sensor: Brake pedal forces, ABS pressures
- Well stimulation
- Coil tubing
- MWD
- Wellhead measurement
| | Product Specifications | Form Factor | Flush | Order Code | AP311DL,1A,2U,5D,6A | Pressure Range | 2,000 psi | Pressure Unit | Gage | Accuracy | 0.5 % FS | Non-linearity and Hysteresis | ±0.05 % FS | Non-repeatability | ±0.1 % FS | Output | 2 mV/V nominal | Resolution | Infinite | Media | Gases, liquids compatible with wetted parts | Temperature (Operating) | -54 °C to 149 °C [-65 °F to 300 °F] | Temperature (Compensated) | 16 °C to 71 °C [60 °F to 160 °F] | Temperature Effect (Zero) | 0.01 % FS/°F | Temperature Effect (Span) | 0.02 % reading/°F | Electrical Termination (std) | PTIH-10-6P or equiv. (hermetic stainless) | Mating Connector | PT06A-10-6S or equiv. (AA111) | Strain Gage Type | Bonded foil | Insulation Resistance | 5000 mOhm @ 50 Vdc | Bridge Resistance | 350 Ohm | Shunt Calibration Data | Included | Excitation (calibration) | 5 Vdc | Excitation (acceptable) | Up to 5 Vdc or Vac | Overload (safe) | 50 % over capacity | Overload (burst) | 400%/ < 25k | Wetted Parts Material | 17-4 PH Stainless Steel | Case Material | Stainless Steel | Weight | 2 oz | Dead Volume | Flush diaphragm | Proof Pressure | 400 % (max. 25k psi) | Pressure Port | 7/16-20 UNF male | Product Dimensions | O9,01 mm x 45,72 mm L [O0.355 in x 1.8 in L] | Agency Approvals and Standards | CE approved | UNSPSC Code | 41112110 | UNSPSC Commodity | 41112110 Pressure Transducer | Availability | Global | Series Name | A-105 |
|
Назад в раздел
|